Guide · Moving data at scale

Ship drives or use the network?

When it is faster to put data on a truck, when the network wins, and how to decide in five minutes — with the math, the hidden steps of shipping, and a decision checklist.

Updated November 18, 2026 · by the Zettar team
The short answer. Compare door-to-door shipping time with what your network can move in the same time. At line rate (about 90% utilization), a 10 Gbps link moves about 97 TB a day and a 100 Gbps link about a petabyte a day. If shipping — including copying data onto and off the devices — takes a week, a 100 Gbps link moves roughly 6.8 PB in that week. Shipping still makes sense for one-time moves from places with little or no connectivity; for recurring flows, changing data, or anything above a few gigabits, a network running at line rate usually wins.

How much can the network move while a shipment is in transit?

The fair comparison is not “network vs. courier” — it is how much data each moves in the same elapsed time. This table assumes a well-engineered path running at about 90% of the link.

Link1 day3 days1 week2 weeks
1 Gbps10 TB29 TB68 TB136 TB
10 Gbps97 TB292 TB680 TB1.4 PB
25 Gbps243 TB729 TB1.7 PB3.4 PB
100 Gbps972 TB2.9 PB6.8 PB13.6 PB
400 Gbps3.9 PB11.7 PB27.2 PB54.4 PB

Formula: TB per day = link Gbps × 0.9 × 0.45 TB per hour per Gbps × 24. These figures need a path that actually reaches line rate — if your current tools realize a fraction of the link, scale them down accordingly, and see why transfers run slower than the link.

The hidden steps of shipping

Transit is only part of a shipment’s timeline. Door to door, you also wait for:

  • Getting the devices. Ordering, provisioning, and delivery of drives or transfer devices before any data moves.
  • Copying data on. Loading the devices is itself a data-movement job, limited by the same storage and host throughput that slows network transfers.
  • Packing, transit, and receiving. Courier time, customs for cross-border moves, and handling at the destination.
  • Copying data off and verifying it. Ingest into the target storage or cloud, then checksumming that every file arrived intact.
  • Catching up on changes. Data written at the source after the copy started still has to be synced — usually over the network anyway.

Add these up honestly before comparing. A move that looks like “two days by courier” is often one to several weeks door to door.

When does shipping still make sense?

  • There is no usable network at the source — a vessel, a remote field site, or a disconnected location.
  • The available link is very slow relative to the data, and upgrading it is not an option.
  • It is a one-time move of static data, with no deadline pressure and no ongoing flow afterward.

When does the network win?

  • You have a fast link. At 10 Gbps and above running at line rate, the network usually beats door-to-door shipping for anything that is not enormous.
  • Data keeps arriving. Instruments, sequencers, training pipelines, and sensors produce data continuously; shipping cannot keep up with a flow.
  • Data changes during the move. The network can sync changes up to cutover; a shipment is out of date the day it leaves.
  • Custody matters. Over the network, data never leaves your control, and every transfer can be encrypted and checksummed end to end.
  • It is recurring or multi-site. Replication, DR, and hybrid-cloud flows happen every day, not once.

A hybrid that often works best

For a very large one-time seed over a slow link, ship the bulk and then use the network to sync everything that changed since the copy — and to carry the ongoing flow from then on. The faster the network path, the smaller the share worth shipping.

A five-minute decision checklist

  • How much data, and is it static or still growing?
  • What link speed do you have — and what share of it do your tools actually achieve today?
  • What is the realistic door-to-door shipping time, including copy-on, copy-off, and verification?
  • Is this a one-time move or the first of many?
  • What are your custody, encryption, and audit requirements?

Then compare the shipping timeline with the table above. Try your own figures in the transfer-time calculator.

What line rate looks like in practice

With SLAC National Accelerator Laboratory and ESnet (U.S. DOE), Zettar moved 1 PB in 29 hours over a 5,000-mile path at 96% link utilization, encrypted and checksummed — while capped at 80 Gbps. On a full 100 Gbps link that is a petabyte a day: faster than most shipments, with the data never leaving your custody. The Zettar zx Appliance delivers that engineering turnkey, so the network option is available the day it is racked.

Estimate your transfer time → How to transfer petabytes →

FAQ

Common questions

Is it faster to ship hard drives or transfer data over the network?

Compare door-to-door shipping time — including getting devices, copying data on and off, transit, and verification — with what your link moves in the same time. At line rate, a 100 Gbps link moves about a petabyte a day and a 10 Gbps link about 97 TB a day, so for most moves over a fast link the network wins.

How much data can a 100 Gbps link move in a day?

About 970 TB — roughly a petabyte — when the path runs at line rate (about 90% utilization). A 10 Gbps link moves about 97 TB a day, and a 400 Gbps link about 3.9 PB.

When does shipping drives still make sense?

When there is no usable network at the source, the link is very slow relative to the data and cannot be upgraded, or it is a one-time move of static data with no deadline. For a huge seed over a slow link, ship the bulk and sync the changes over the network.

What happens to data that changes during a shipment?

It has to be synced afterward, usually over the network. A network transfer can keep syncing changes right up to cutover, so nothing is out of date when you switch over.

Is shipping or the network more secure?

Over the network, data never leaves your custody, and Zettar encrypts every transfer with TLS and verifies every byte with unconditional end-to-end checksums. Shipped media must be encrypted, tracked, and verified on arrival, and is out of your hands in transit.

See it for yourself

Skip the courier.

See the appliance move your data at line rate — or talk through your move with an engineer.